va-Q-vip

Details

va-Q-vip is an evacuated micro porous thermal insulating panel with excellent insulating properties. The core material of va-Q-vip is fumed Silica board and non-combustible. It is sealed into a high gas barrier film under vacuum. 

Due to the special "edge fold technique va-Q-seam", va-Q-vip has  smooth faces and sharp rectangular edges so that individual va-Q-vips can be tightly fitted together, making an almost seamless assembly possible. In general va-Q-vip is produced in rectangular shapes. It is also available on request in other shapes such as triangle, trapezium, corner cut and oval cut.

Applications

va-Q-vip is specially developed for insulation applications where not much space is available but a high thermal resistance is necessary. va-Q-vip is a successful insulation element in the following areas:

  • Building application (roofs, floors, etc)
  • Thermal packaging (Medical transport boxes, etc)
  • Appliances (Water boiler, etc)
  • Automotive (train, ships, aerospace, etc)

 Features

  • Drastically reduced heat fluxes
  • Drastically reduced insulation thickness
  • Increased usable volume
  • All purpose VIP with a long service life
 

va-Q-vip Vacuum Insulated Panels Print/PDF

va-Q-vip thermal insulation



 

Technical data

Product Name va-Q-vip
Evacuated micro porous thermal insulating panel sealed into a high gas barrier film under vacuum
Surface Colour Silver
Geometry Rectangular shape (without protruding flanges*)
Density 
(bulk, DIN EN 1602)
180-210 kg/m³
Thermal conductivity <0.005 W/(mK) @ 20mm thickness (measured value)
Temperature stability -70°C to +70°C (due to the film)
Thermal shock resistance Not sensitive to heat and cold shock in the given temperature range
Humidity stability 0% to 60%
Internal gas pressure <5 mbar (at delivery)
Increase of gas pressure Approximately 1mbar/year 
(at 20mm thickness and normal room conditions)
Standard dimension (LxW) 
I & II
I: 1000mm x 600mm 
II: 500mm x 600mm
Nonstandard dimension 
III & IV
III: Area > 0,10m² and <0,60m²
IV: Area <0,10m²
Special form Triangle, trapezium, special shape, cornet cut, hole cut and recessed surface
Nominal Thickness 10mm to 50mm

Size tolerance

0 to 500mm
501 to 1000mm

 

+2 / -4mm
+2 / -5mm

Thickness tolerance

±1mm

Specific heat capacity

0.8 kJ (kg K) (at normal room temperature)

Mass per area

4 kg/m² (at 20mm thickness)

Compressive strength

Approximately 150kPa (at 10% compression)

Service Life

Extrapolated, depending on application up to 60 years.

For 10mm and 15mm thicknesses, if a flat edge is required, the flanges are refolded onto the main surface of panel.

All figures are intended as a guide and should not be used for preparing specifications.

 

Nominal Thickness to R-Value @ 10°C
Nominal Thickness 
mm
Lambda/K Value/Thermal
Conductivity
R Value
10 0.008 1.3
15 0.008 1.9
20 0.007 2.9
25 0.007 3.6
30 0.007 4.3
40 0.007 5.7
50 0.007 7.1

 

 
 
CPD

   

TECHNICAL RESOURCES

    

CASE STUDIES

    

NEWS

   

VIDEOS 

     

CONTACT US

PH: 1800 174 900 
 

       
Search
 

INNOVATION BUILT ON EXPERIENCE

Proctor Group Australia

 

Preloaded image