DCT Thermalcheck Super PIR Insulated Plasterboard

Details

DCT Thermalcheck Super boards consist of a laminate of recessed edge gypsum plaster board pressure bonded to DCTech supplied polyisocyanurate (PIR) thermal insulation foam. DCT Thermalcheck Super thermal insulated plasterboards allow for installation in one easy step, using the same fixing methods as ordinary plasterboard.

Suitable for stud, brick, masonry walls and ceilings in new or refurb projects, DCT Thermalcheck Super provides a continuous layer of thermal insulation across studs in timber frame walls removing the ‘thermal shorts’ that occur at the framing which can reduce the insulation value of a conventional wall by up to 20%.

DCTech supplied polyisocyanurate (PIR) thermal insulation is a non structural, rigid board consisting of a glass fibre-reinforced PIR foam core laminated between smooth, reflective aluminium foil facers on both sides. The glass-fibre reinforcement, along with chemical modifications, contribute to improved fire performance and dimensional stability.

Manufactured using a structural waterproof polyurethane adhesive, DCT Thermalcheck Super thermal insulated plasterboards are easy to handle and quick to install. DCT Thermalcheck Super is ideal for lining cold wall faces especially cellars and concrete slab construction.

 

DCT Thermalcheck Insulation + Plasterboard Print/PDF

DCT Thermalcheck Super PIR + Plasterboard 

The thermal resistance of DCT Thermalcheck Super also eliminates the problem of surface condensation, saving wear and tear on surface finishes.

Applications

  • Commercial retrofit interior wall and ceiling liner for moderate impact traffic areas

Features

  •  High R-value insulation in a minimum thickness board

Standards

  •  Dow Tuff-R is Green Star Compliant, CFC & HCFC Free, Zero ODP, LEED, USGBC 
 

Specification Clause - General Application Board

DCT Thermalcheck Super PIR insulated plasterboard board should be described in specifications as:-

The insulation shall be DCT Thermalcheck Super nominal ......mm polyisocyanurate rigid foam panel with minimum compressive strength 120 kPa. Thermalcheck insulated plasterboard is distributed by Proctor Group Australia - T: 1800 174 900  

 

Technical data
Product Name: DCT Thermalcheck Super
Polyisocyanurate PIR rigid thermal insulated plasterboard
Product Description: DCTech Thermalcheck Plus boards consist of a laminate of recessed edge gypsum plaster board pressure bonded to DCT PIR (polyisocyanurate) thermal insulation foam. Suitable for stud, brick, masonry walls and ceilings in new or refurb projects.

Surface Finish:
Product Code:

White Plasterboard
DCT Thermalcheck Super

Surface Finish:


Product Code:
Colour:
Edge Treatment:
Nominal Thickness:
Width:
Length:
Density:
Thermal K Value: 
Compressive Strength:
Material water vapour resistivity

Reinforced coated three ply polymer foil facer on one side. Reinforced polymner/foil non-reflective facer on the other
DCT PIR
Silver foil facers with yellow foam core
Butt edge
13, 25, 30, 40, 45 and 50mm
1200 mm
2400 and 2700 mm
26 kg/m³
0.022 W/mK
120 kPa
>100 MNs/gm

 

Nominal Thickness to R-Value
Added material R values - product only 
Nominal Thickness (mm)
Plasterboard + Insulation 
 R-Value
Insulation only 
10 + 13  0.7
10 + 25 1.2
10 + 30 1.4
10 + 40 1.9
10 + 45 2.1
10 + 50 2.3

 

 

 
 
CPD

   

TECHNICAL RESOURCES

    

CASE STUDIES

    

NEWS

   

VIDEOS 

     

CONTACT US

PH: 1800 174 900 
 

       
Search
 

INNOVATION BUILT ON EXPERIENCE

Proctor Group Australia

 

Preloaded image