Thermal laminate retro-fit - CW003a

Thermal laminate retro-fit - CW003a


Products
Enviroseal ProctorWrap Commercial Wall (CW)
DCT Thermalcheck or DCT Thermalcheck Super

Location 
To the inner masonry or framed skin (occupant side).

Material
Insulation
Rigid Cellular Foam board equal to DCT Thermalcheck.

Product
DCT Thermalcheck

Total R-Value
[Complete]

Fixing
Daub and screw fix

Installation
Fix DCT Thermalcheck to the inside of frame. To DCTech printed details.

Sarking
Enviroseal ProctorWrap Commercial Wall is an air tight three layer spun bonded polypropylene breathable sarking membrane with a vapour resistance of less than 0.27MN.s/g. Breather foil does not comply with this specification.

DCT Thermalcheck – used in high moisture environments

DCT Thermalcheck Super - used in projects where space is limited and moderate indoor humidity

There are a large number of factors that need to be considered in assessing and managing condensation risk. Such factors include the local climate, building use, position, thickness and type of insulation, position and integrity of vapour barriers, and the degree and location of mechanical or passive ventilation. It is highly recommended that designers undertake a condensation risk analysis.

 

 
 
CPD

   

TECHNICAL RESOURCES

    

CASE STUDIES

    

NEWS

   

VIDEOS 

     

CONTACT US

PH: 1800 174 900 
 

       
Search
 

Proctor Group Australia
INNOVATION BUILT ON EXPERIENCE

 

Preloaded image