Insulation below slab on ground/raft - CF004a

Insulation below slab on ground/raft - CF004a


Products
Dow Styrofoam RTM-X 

Preparation
Confirm with a structural engineer for the required compressive strength required.

Installation
Lay non-porous rigid board directly onto the levelled ground that will be under the slab, excluding footings and structural beams. Lay separating damp proof membrane (DPM) above the Styrofoam RTM-X, lapping 100mm at joints.

Insulation
Dow Styrofoam RTM-X

Total R-Value
[Complete]

Final finish 
[Complete]

[Size] – Determined by required material  R-value. 30mm Dow Styrofoam RTM-X Board will give R1.1 material / product only R-Value. Compressive strength needs to be considered by a structural engineer for dynamic and static loads. Follow structural engineers detail on raft slab detail.

 

 
 
CPD

   

TECHNICAL RESOURCES

    

CASE STUDIES

    

NEWS

   

VIDEOS 

     

CONTACT US

PH: 1800 174 900 
 

       
Search
 

INNOVATION BUILT ON EXPERIENCE

Proctor Group Australia

 

Preloaded image